4 speed control knobs (speed regulation/SPEED), 4 band selection switches for A/B/C, 1/2/3, 1/2/1+2, 1/2/3/5/6/7/8/9/10+4 three position self reset twist switches (A1/A2, A3/A4, A5/A6, A7/A8), 4 three position self lock hold mode twist switches (B1/B2, B3/B4, B5/B6, B7/B8), 4 two position self-locking hold mode toggle switches (C1 open/close close, C2 open/close, C3 open/close, C4 open/close, etc.), 8 key identifiers - up, down, east, west, south, north, 1, 2, start, emergency stop, power indicator, signal indicator;
Main functions: 4 speed control knobs, each corresponding to 0-10V output; Four three position self resetting torsion switches, each corresponding to one mechanism with two forward and reverse switch values for self resetting action; Four three position self-locking twist switches, each corresponding to one mechanism with two forward and reverse switching values that self maintain action; Four two position self-locking twist switches, each corresponding to the start/stop of one device, with one switch value maintaining action; One ABC three selector rotary switch corresponds to three switch actions, which can be used to select different states or devices. One 123 three selection position rotary switch can select the action of equipment 1, 2, and 3, corresponding to the output of three normally open point relays at the receiver end; One 1/2/1+2 rotary switch with a total of three selection bit bands, which can select any one or two devices from two devices to perform actions together, corresponding to two normally open relay outputs at the receiver end; 1 ten position band selection switch, which can select 10 different states or action forms or device numbers, corresponding to 10 normally open relay outputs at the receiver end; 8 action execution buttons, all in jog mode, with up and down interlocking, east-west interlocking, north-south interlocking, 1 and 2 interlocking. Each button corresponds to one normally open relay output at the receiver end; The start knob and emergency stop knob are used to start the transmitter's local power supply and connect the corresponding receiver's main output control circuit. At this time, the controlled end equipment is powered on, and the emergency stop can be snapped to instantly cut off the main output control circuit and all other executing actions.
The product highlights excellent anti-interference performance, with unique identification codes between each remote control transmitter and receiver, reaching up to billions of sets, never repeating, and strictly avoiding mutual interference and interference. And the remote control has up to 50-256 frequency points, and each set in the same environment can be configured with separate frequency points. Even if the frequency points overlap, given the uniqueness of the ID identification code, there will be no impact on each other, ensuring safety and reliability.
Usage: Equipment within the range of 46 point switch value+4 analog variable speed regulation function, such as bridge erecting machine, beam lifting machine, port crane, tower crane, traveling crane, overhead crane, conventional crane, three hoist traveling crane, three small vehicle traveling crane, gantry crane, gantry crane, etc., as well as chain hoist, special vehicle, tunnel trolley, hydraulic machinery, excavation machine pump station, mobile crusher, special vehicle, rolling machine, multi motor equipment, etc Shearing machines, construction machinery, construction vehicles, mining machinery, etc.
Technical parameters: remote control distance of 100 meters, 250 meters, working temperature of -35 ° -+75 °, transmitter power supply of 3 No. 5 dry batteries of 4.5V, receiver standard working voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc., can be adapted through external transformer voltage conversion., External transformer voltage conversion adaptation can be added.
Model and configuration instructions: This machine model DH-Z4M8F12B10X3X3X3 comes standard with 1 transmitter and 1 receiver. The transmitter antenna is built-in, and the receiver is equipped with an external extended suction cup antenna (1 meter long feeder), which is attached to the outside of the distribution box and installed inside the receiver.
