Rope Saw Cutting Machine Remote Control

Rope saw cutting machine remote control

DH-Z1M1BZ (DC24V/1 generator, 1 receiver, 2 switch values, 1 0-10V), 1 three-position self reset rotary switch, marked with up and down straight arrows, 1 speed control knob (speed control/SPEED), conventional increase and decrease signs (without Chinese), 1 "ENABLE" button, start (START), emergency stop (STOP), power indicator light (POWER), signal indicator light (Signal).

Main function: Control the forward and reverse rotation of the equipment and can perform stepless speed control. To control the process and ensure the safety of operation, the enable function can be activated, which means that other actions can only be executed when the "enable" button is pressed on one side. There is also a start and emergency stop knob on the remote control itself. Emergency stop corresponds to two relay outputs, including one normally open point (common) and one normally closed point (backup).

This machine can achieve 2-way switch control and 1-way analog 0-10V stepless speed regulation.

Product highlight: Good anti-interference performance, with unique identification codes between each remote control transmitter and receiver, reaching hundreds of millions of sets, never repeating, and strictly avoiding mutual interference and potential interference. And the remote control has up to 50-256 frequency points, and each set in the same environment can be configured with separate frequency points. Even if the frequency points overlap, given the uniqueness of the ID identification code, there will be no impact on each other, ensuring safety and reliability.

Usage: Industrial remote controller with 2-circuit switching value and 1-circuit analog variable speed regulation, which can be used for rope saw, grinder, variable frequency motor, variable frequency winch, variable frequency electric hoist, stone cutting machine, lawn machine, concrete cutting machine, rope saw cutting machine, grinder, polishing machine, roller rack, rail car, electric flat car, variable frequency elevator, variable frequency crane, etc.

Technical parameters: remote control distance of 100 meters, 250 meters, working temperature of -35 ° -+75 °, transmitter power supply of 3 No. 5 dry batteries of 4.5V, receiver terminal conventional working voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc., can be adapted through external transformer voltage conversion.

Model and configuration instructions: This machine model DH-Z1M1BZ (0-10V) comes standard with 1 transmitter and 1 receiver. The transmitter antenna is built-in, and the receiver is equipped with an external extended suction cup antenna (1 meter long feeder), which is attached to the outside of the distribution box and installed inside the receiver.