Remote control for rail cars and electric flat cars
1 1/2/3 identification band rotary switch DH-Z2M4F2B3X (DC24V/100 meters/1 generator, 1 receiver/11 channel switch quantity+2 channels 0-10V), 1 three-position self reset rotary switch+1 three-position self-locking holding rotary switch. The former is marked as a straight up and down arrow, the latter is marked as a forward and reverse rotation arrow, and 2 speed control knobs (speed regulation/SPEED), with conventional increase and decrease markings (without Chinese), The four buttons identify ABCD, START, and STOP respectively.
Main function: 1 three-position self reset torsion switch, used for a self reset mode, which is a forward and reverse mechanism switch quantity controlled by a jog. One three position self-locking torsion switch, used for the forward and reverse movements of a mechanism to maintain the operating switch value. Two speed control knobs, capable of infinitely adjusting the speed of two forward and reverse mechanisms, with a speed range of 0-10V. Four switch value buttons, all in jog mode, with A and B jog and interlock, C and D jog and interlock. Each button corresponds to one normally open relay output at the receiver end.
Product highlight: Good anti-interference performance, with unique identification codes between each remote control transmitter and receiver, reaching hundreds of millions of sets, never repeating, and strictly avoiding mutual interference and potential interference. And the remote control has up to 50-256 frequency points, and each set in the same environment can be configured with separate frequency points. Even if the frequency points overlap, given the uniqueness of the ID identification code, there will be no impact on each other, ensuring safety and reliability.
Usage: 4-way switch value 2-way analog variable speed industrial remote controller, which can be used for variable frequency traveling crane, variable frequency overhead crane, variable frequency crane, variable frequency gantry crane, variable frequency wharf crane, variable frequency port crane, etc., as well as rope saw, grinder, variable frequency motor, variable frequency winch, variable frequency electric hoist, stone cutting machine, lawn machine, concrete cutting machine, rope saw cutting machine, polishing machine, roller rack Rail cars, electric flat cars, variable frequency elevators, variable frequency cranes, etc.
Technical parameters: remote control distance of 100 meters, 250 meters, working temperature of -35 ° -+75 °, transmitter power supply of 3 No. 5 dry batteries of 4.5V, receiver terminal conventional working voltage of 12-24V AC/DC, other voltages of AC220V or AC380V, etc., can be adapted through external transformer voltage conversion.
Model and configuration description: This machine model DH-Z2M4F2B3X (DC24V/100 meters/1 generator, 1 receiver/11 circuit switch quantity+2 circuits 0-10V), standard configuration includes 1 transmitter+1 receiver, transmitter antenna is built-in, receiver is equipped with an external extended suction cup antenna (1 meter long feeder), adsorbed on the outer side of the distribution box, and receiver is installed inside.
