|Control Distance:||≥100m||Panel & Button Materia:||Stainless Steel|
|Enclosure Protection Class:||IP65||Transmitter Antenna:||Inside|
|Shell Material:||Reinforced Nylon Plastic||Warranty:||12 Months|
|Material:||Plastic And Silicone||Function:||Waterproof,Wireless Control|
rack shuttle industrial wireless remote control,
4 buttons shuttle remote control,
Reinforced nylon plastic shuttle remote control
1 to 2 control rack shuttle wireless remote control, the whole set includes 1 transmitter + 2 receivers, only one of the receivers will be controlled at the same time point, the remote control distance is provided according to 100 meters, and the receiver is designed as a relay output Mode, 4 action relay outputs, and 2 relay outputs corresponding to emergency stop include 1 normally open point and 1 normally closed point. Normally open point is used, and normally closed point is used as a backup.
Transmitter button layout and function description
1) 4 action buttons, corresponding functions: up, down, forward, back, corresponding to the receiver side 4 relay outputs, up and down, inching and interlocking logic, the same way forward and back are also inching and interlocking logic.
2) 1 two-position rotary switch, used to select No. 1 and No. 2 receivers, either one or the other, programmed number selection, does not correspond to relay output;
3) 1 "lock/unlock" button, and start + emergency stop knob. Emergency stop corresponds to 2 relay outputs including 1 normally open point and 1 normally closed point. Normally use the normally open point, and the normally closed point as a backup., When the emergency stop is taken, all outputs can be cut off instantly. The start button on the transmitter side is turned off, the power supply of the transmitter side is turned off, and after 5 seconds, the receiver side can also emergency stop itself to ensure safety!
4) The non-standard customized model DH-Z4F2X1P2 (DC24V/100m/1 send and 1 receive/relay output) of the 1 to 2 number selection shelf shuttle trolley remote control, other voltages are adapted through the external transformer;
5) If it is designed as RS485 interface output mode, 4 actions correspond to 4 jog mode 485 interface digital signal outputs, and emergency stop corresponds to 2 relay outputs in the same way. Then the product customized model DH-Z4F2X1P2/485 (DC24V/100m/1 send and 1 receive/RS485/Moudbus protocol).
|Controlling distance||≥100m/can be customized 250m/500m|
|Direction of movement||Up, down, East, South, West, North|
|Receiver Antenna||Inside / optional external antenna|
|Button life||≥ 1 million times|
|Panel material||stainless steel|
|Button material||stainless steel|
|Shell material||90% industrial reinforced nylon plastic + 10% industrial chemical fiber|
|Transmitter power supply||DC4.5 (3 pcs alkaline batteries)|
|Receiver power supply||DC12V/24V or AC 36V/220V/380V (AC by external transformer)|
|Button Text||Arrow / English / Chinese|
|Enclosure protection class||IP65|
three built-in No. 5 alkaline dry batteries can be replaced at one time and can be used for 1-3 months. The red light will continue to light when there is no power, and can still be used for more than 8 hours under the red light!
1. Transmitter * 2 pieces
2. Receivers * 1 piece
3. The receiver comes with 1m cable connector
4. Operation and Maintenance Manual
1. Due to transportation requirements, the product is not equipped with battery.
2. When you order, please remark the voltage, DC12V/24V or AC220V/380V(AC by external transformer).
1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
Packing & Delivery
To provide quality products at the same time to improve after-sales support
An independent R & D and design company with ten years of technology accumulation, which can be quickly customized.
We have own assem- bling factory and mold factory.
Professional team to provide you with efficient service.
Contact Person: Mr. Zhu