16 Buttons Fire Truck Industrial Wireless Remote Control

16 Buttons Fire Truck Industrial Wireless Remote Control

Product model:DH-Z1YW5YL11B2S16FCAN

This time it is customized according to 200 meters in an open environment. The receiver is designed for CAN bus output, except In addition to the output corresponding to emergency stop, other buttons are output via CAN bus, digital signal output corresponding to fixed value jog or hold mode for switch value control, digital signal output corresponding to continuous change of analog stepless speed regulation, and physical contact 2 corresponding to emergency stop The relay output includes 1 normally open point (commonly used) and 1 normally closed point (standby).

Transmitter button layout and function description (lay out according to the original product style)

1.16 buttons with LED indicator light, the controlled end device confirms whether the action has been executed or not, and then informs the remote control receiver through the CAN bus controller to feed back and light up. The functions are as follows: 4 operating lever two movement movement, 5 operating lever cutting arm movement, 7 crawler speed low, 8 crawler speed high, 10 second transportation start and stop, 11 hydraulic motor start and stop, 13 load star wheel forward start and stop, 14 Load star wheel to start and stop backwards, 16 to move forward and start to stop, 17 to move backward to start and stop, 19 cutting low speed, 20 cutting high speed, 22 rear lifting cylinder retracted, 23 rear lifting cylinder extended, 24 front lifting cylinder retracted , 25 front lifting cylinder extension, 32 reel take-up start and stop, 33 reel pay-off start and stop, 35 vehicle lighting switch, 36 knife head water spray start and stop, 38 arched device extension on and off, 39 arched device contraction On-off, 41 small platforms rise on and off, 42 small platforms fall on and off.

Each button corresponds to a fixed-value digital signal output in jog mode, and no interlock logic is set, which is convenient for the back-end CAN bus controller to customize processing.

2. 5 single-axis proportional joysticks, respectively used to control: 26 left track forward and backward, 27 loading baffle up and down, 28 right track forward and backward, 29 telescopic boom extension and retraction, 43 arched lifting device up and down , 5 single-axis joysticks correspond to 5 continuously changing digital signal outputs at the receiver end. Single-axis proportional lever, push forward and backward, set vertical to the plane 7.5 amplitude as the critical point of action execution, when the critical point first corresponds to a fixed value self-reset mode digital signal output (direction switch), continue to push the switch direction The stepless speed control is the same in the opposite direction. 5 single-axis proportional levers, a total of 10 switching values ​​(corresponding to 10 digital signals in self-reset mode) + 5 analog control (5 continuously changing digital signals).

3. 1 universal infinite rocker, corresponding to button number 30, X axis controls "cutting arm up, down, left, and right", Y axis controls "conveyor belt up, down, left, and right", and the angle between X axis and Y axis presents different proportional output. In the same way, set the X-axis and Y-axis coordinate plane to 7.5 degrees as the critical point of the dead zone, and the Y-axis plus or minus 5 degrees is the purpose of linear pushing. Only when the deviation exceeds 5 degrees, the X-axis direction is considered to be executed. The output is the same when operating in the X-axis direction. The four directions first correspond to the direction switch control of the 4 critical points. If you continue to push it, it corresponds to the speed increase control. This joystick corresponds to

4 switches + 2 analog control, which corresponds to the 4-channel fixed value self-reset mode. Digital signal + 2 channels of continuously changing digital signal output.

4.11 two-position self-locking hold mode toggle switches, each of which corresponds to a digital signal output in the fixed holding mode at the receiver. 1 Control panel on and off (remote control power start and stop), 3 joystick activation (cutting arm movement/second movement movement), 6 crawler speed selection, 9 activation (second movement/hydraulic motor), 12 loading star wheel movement direction selection , 15 selection of the running direction of the first transportation, 18 selection of cutting motor speed, 31 selection of reel take-up/pay-off, 34 selection of lighting/water spray, 37 selection of arch-shaped lifting device telescopic selection, 40 selection of small platform lifting options,

5. 1) 2 indicator lights, used for constant activation, flashing emergency stop, low battery, zero position control, constant activation is the normal operation of the operating button flashing reminder, when the battery is low, the red light will continue to light up, how to control the zero position To be determined. 2) 21 step switch 4 gears-cutting arm speed selection, corresponding to the receiver terminal 4 fixed-value holding mode digital signal output; 3) 1 emergency stop mushroom head knob, used to cut off the controlled in any emergency End the output of all control loops to ensure safety! 4) Another "lock/unlock" button is arranged.

This time cantilever tunneling machine wireless remote control non-standard customized model DH-Z1YW5YL11B2S16FCAN (DC24V/200m/1 send 1 receive/two-way/CAN bus CANOPEN protocol), other voltages are adapted through an external transformer!

1. The Joystick is more convenient and sensitive. 5-node paragraph joystick, optional 5-speed, easy to operate.

2. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.

3. The transmitter is sealed with silicone rubber ring, which is good waterproof.

4. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.

5. Stainless steel panel and buttons, more resistant to be broken and smudge.

6. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.

♦ More Options More Function

The function can be customized according to your requirements, please contact the supplier.

Default configuration

1. Transmitter * 1 piece

2. Receivers * 1 piece

3. Strap * 1 piece

4. Free Joystick * 1 piece

5. The receiver comes with 1m cable connector

6. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. The function can be customized according to your requirements, please contact the supplier.

Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.

FAQ

1.Q: Is there a warranty?
A: All our branded products have a 12-month warranty period. We provide 24-hour after-sales service and technical support. If you find any problems during installation, please feel free to contact us.

2. Q: Will you provide after-sales service?
A: Yes. Of course. If there are any problems during operation or installation, please keep free to contact with us. We provide professional guidance and help.
 

3. Q: What is your minimum order?
A: We can accept sample orders for trial orders.
 

4. Q: What certificates are approved for your product?
A: We have CE, FCC, ISO9001.
 

5. Q: Is your price the lowest?
A: We provide high quality industrial remote controls. The quality of our supply is value for money, inferior products will waste and affect the work process. The right price and high quality products are the best choice.
 

6. Q: Can you customize it to my needs?
A: You can send me inquiries according to your needs. We can customize them with technical engineers.