|Operating Temperature:||-40℃ ~ +85℃||Size:||20*8.5*5cm|
|Transmitter Weight:||380g||Materil:||Industrial Reinforced Nylon Plastic|
|Max. Voltage:||440V||Protection Level:||IP65|
|Transmitter Power Supply:||DC 3V||Control Distance:||≥100m/can Be Customized 250m/500m|
|Transmitter Antenna:||Inside||Warranty:||1 Year|
AC380V industrial remote controller,
250m industrial remote controller,
AC380V single button remote control
1 pair of 90 number selection control ladle trolley wireless remote control, the whole set contains 1 transmitter + 1 receiver 2 parts, the remote control distance is provided according to 100 meters. The receiver end is designed as a relay output, open and close, each corresponding to 1 relay output, emergency stop corresponds to 2 relay outputs including 1 normally open point + 1 normally closed point, normally use normally open point, normally closed point as backup .
Transmitter button layout and function description
1) Layout 2 action execution buttons: open and close, designed for jog mode control, and open and close interlock logic;
2) Layout 2 band rotary selector switches, each with 0/1/2/3,,, 9 total 10 number selection positions, number 1 is used for the tens place, number 2 is used for the ones place, and can reach the number 0-99 Digital selection, that is, the number selection control can be carried out for more than 99 devices;
3) Layout 2 buttons, namely "select number confirm" and "select number cancel". For safety reasons, in terms of program processing, at the same time point, only one of the numbers can be selected, and no more than one or more than one can be selected at the same time. , To ensure the safety of the control of the ladle trolley;
3) One "lock/unlock" button, start + emergency stop knob, emergency start is to start the transmitter's own power switch, and at the same time the output control loop corresponding to the receiver end is turned on, at this time the controlled end device is powered on, emergency stop Take a photo, you can instantly cut off all output. The start button on the transmitter side is turned off, the transmitter side power is turned off, and after 5 seconds, the receiver side can also emergency stop by itself to ensure safety!
4) This time the 1 to 90 number selection control opens and closes the action of the wireless remote control of the ladle trolley non-standard customized model DH-Z2F2X/21P90 (DC24V/100m/1 send 1 receive/relay), other voltages can be transferred through an external transformer. match!
Contact Person: Mr. Zhu