Product Details:
|
Transmitter Function: | 24 Buttons | Size: | 28.8*10.8*5.5cm |
---|---|---|---|
Transmitter Weight: | 1.5kg | Frequency: | 433MHz |
Control Distance: | ≥100m/can Be Customized ≤2000m | Panel & Button Material: | Stainless Steel |
Handheld Part Size: | 10.7cm | Transmitter Antenna: | Inside |
Function: | Waterproof | Warranty: | 1 Year |
Operating Temperature: | -25℃ ~ +75℃ | Max. Current: | Tiny Current |
Highlight: | DC12V heavy equipment remote control,100m heavy equipment remote control,DC12V hoist crane remote control |
24 single-speed buttons industrial wireless radio remote control for crane hoist winch elevator
Specification
Model | DH-Z24F |
Transmitter Function | 24 single-speed buttons |
Size | 28.8×10.8×5.5cm |
Transmitter Weight | 1.5kg |
Transmitting fraquency | 433MHz |
Frequency channel | 50~256 |
Controlling distance | ≥100m/can be customized |
Direction of movement | Up, down, East, South, West, North |
Transmitter Antenna | inside |
Receiver Antenna |
Inside / optional external antenna |
Button life | ≥ 1 million times |
Panel material | stainless steel |
Button material | stainless steel |
Shell material | 90% industrial reinforced nylon plastic + 10% industrial chemical fiber |
Transmitter power supply | DC4.5 (3 pcs alkaline batteries) |
Receiver power supply | DC12V/24V or AC 36V/220V/380V (AC by external transformer) |
Temperature range | -25℃~+75℃ |
Button Text | Arrow / English / Chinese |
Enclosure protection class | IP65 |
Application | Gantry crane,JCB,Hoist,Port crane,Cantilever crane,Ship crane,Bridge erecting machine,Beam lifter,Lifting platform,Windlass,Shearing machine,Sand Screening Machine,Industrial furnace door,Winch etc. |
Product Description
Standard 24 buttons Industrial Wireless Remote Control DH-Z24F
♦This price is for 2 transmitters and 1 receiver.
24 industrial wireless remote controls, specifically 24 action function buttons, corresponding to the receiver side 24 switching signal control output, and another start + emergency stop knob, and another 1 or 2 relay corresponding to the emergency stop knob Output. Simply put, this model can perform wireless control of 24 control loops
The button text logo on the transmitter side can be customized according to your needs. The layout of 24 buttons can be designed according to your needs. The same function can be arranged as a three-position lever control. Each lever realizes 3 position control in the front, middle and back. The middle is the zero position, and each of the front and back positions corresponds to 1 normally open relay output at the receiver end. Or it can be arranged as a rotary switch type, it can be a three-position self-resetting rotary switch, or it can be arranged as a two-position self-locking and holding rotary switch, etc.
The receiver side is conventionally designed as a relay output mode, and can also be designed as a combination of relay output + relay input feedback as required. In this case, feedback is often required for each action to confirm whether the execution is in place, which is often dangerous. Or you must know that the previous step has been executed before you can execute the next step. The receiver can also be designed as a data interface such as RS485 or RS232 or CAN bus or DP-Profibus or Ethernet port according to needs. In this case, the corresponding data interface of the controlled end controller or PLC or single-chip computer shall be jointly formulated by both parties. The protocol defines the content output.
Product Features
Our products are different from the plastic remote controller on the market. The stainless steel remote control is more robust and not easy to be damaged.
1. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.
2. Stainless steel panel and buttons, more resistant to be broken and smudge.
3. The transmitter is sealed with silicone rubber ring, which is good waterproof.
4. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.
5. The antenna is built inside to prevent it from being broken.
6. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.
Emergency stop button for safety
Default configuration
1. Transmitter * 2 pieces
2. Receivers * 1 piece
3. The receiver comes with 1m cable connector
4. Operation and Maintenance Manual
Attentions
1. Due to transportation requirements, the product is not equipped with battery.
2. When you order, please remark the voltage, DC12V/24V or AC220V/380V(AC by external transformer).
1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
Generally speaking, as long as the electric control of construction machinery equipment, our remote control, can be seen as, we are specialized in making industrial wireless remote control, facing a wide range of equipment.
We have remote control corresponding to the requirements of crane machinery and equipment in various situations, such as single hook and single speed crane, which has fast and slow speed up and down for single hook, no fast and slow speed in East, West, North and south, and fast and slow speed in each direction for single hook up, down, East, West, North and south.
Answer: the function of the remote control has nothing to do with the tonnage, nor with the motor power of the crane, only with the number of actions.
Yes, the frequency conversion crane is a stepless speed regulation control mode. Like an automatic car, the larger the accelerator is, the faster the speed is. There is no need to engage the gear.
During the operation of the remote control, it has instantaneous and immediate response, the execution time difference is 20-40ms, 1 second is equal to 1000ms, and the signal sensitivity at the receiver end is - 110dbm. Macroscopic judgment with naked eyes, the action of the device end is generated at the moment of key triggering, basically without time difference.
The regular one is 100 meters, but it can be customized for further distance, such as 250 meters, 500 meters, 800 meters, 1000 meters, 1500 meters, 2000 meters, etc. the corresponding distance can be customized according to the actual demand.
To provide quality products at the same time to improve after-sales support
An independent R & D and design company with ten years of technology accumulation, which can be quickly customized.
We have own assem- bling factory and mold factory.
Professional team to provide you with efficient service.
Contact Person: Mr. Zhu
Tel: +8618120197560
Fax: 86-025-5882-9997