Four Wheel Drive Gantry Wireless Crane Controller , Auto Crane Remote

Four-wheel drive gantry crane wireless remote control, the complete set includes 1 transmitter + 1 receiver, the remote control distance is provided according to 100 meters, the receiver end is designed for RS485 output, and the 485 interface of the controlled end PLC is communicated with the Moudbus protocol, except Emergency stop corresponds to the 1 normally open relay output on the receiver side, other button control commands and feedback information are all interacted bidirectionally through the data interface.

Transmitter button layout and function description

1) The chassis walks forwards, backwards, left, and right. The layout is two single-axis proportional levers. The No. 1 proportional lever controls the left and front two outriggers, and the No. 2 proportional lever controls the right and front two outriggers.

Single-axis proportional lever, the greater the pushing range, the faster the speed, analog control mode.

2) For 4 hoisting lifts, a single-axis proportional rod is arranged, which pushes forward and pushes backward, and the greater the pushing range, the faster the speed;

3) Select the number of the lifting column, and arrange 4 two-speed self-locking levers, namely No. 1, No. 2, No. 3, and No. 4. If you need to choose a few, you can turn a few, each corresponding to the receiver end 1 way set Digital signal output in value holding mode;

4) Setting the jacking angle, layout a ten-digit rotary switch and a ones-digit selector switch, all of which are 0-9 and a total of 10 data. If the tens digit is 9 and the ones digit is also selected 9, it means that 99 degrees should be selected. Choose 0 for the tens place and 6 for the ones place, which means that you want to select a 6-degree angle.

and the targeted layout of the two buttons is "Select Angle Confirm" and "Select Angle Cancel". If you choose the right one, press the former, and if you choose the wrong one, press the latter.

5) For braking and parking, the former is arranged as a jog button, and the latter is arranged as a two-speed self-locking lever, both of which correspond to a fixed-value digital signal output at the receiver;

6) 4 spare buttons, 2 self-locking holding modes, 2 jog modes, the former can be used for lighting switches, horns, alarm bells, and the latter can be used for specific jog action needs, 2 jog modes The interlock logic is not set for the buttons, which is convenient for PLC custom processing at the back.

7) LCD screen display, conventional display battery power, signal connection with the receiver, operation button prompts, angle to be selected, and feedback display: oil pressure, liquid level, temperature, horizontal angle, tilt angle;

8) Start + emergency stop mushroom knob, start layout is rotary switch or self-locking button, emergency stop is European emergency stop mushroom head, self-locking hold mode, corresponding to 1 relay output. Start is to start the power switch of the transmitter itself, and at the same time, the output control loop of the receiver is turned on. At this time, the device at the controlled end is energized and the emergency stop is photographed, and all outputs can be cut off instantly. The start button on the transmitter side is turned off, the transmitter side power is turned off, and after 5 seconds, the receiver side can also emergency stop by itself to ensure safety!

The custom model of the four-wheel drive gantry crane wireless remote control DHZ-3YL5FB2SJDSZSX485 (DC24V/100m/1 send and 1 receive/feedback about 5 data/RS485 Moudbus protocol/angle setting issuance), other voltages such as AC220V or AC380V, etc. It is adapted through external transformer conversion!

1. The Joystick is more convenient and sensitive. 5-node paragraph joystick, optional 5-speed, easy to operate.

2. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.

3. The transmitter is sealed with silicone rubber ring, which is good waterproof.

4. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.

5. Stainless steel panel and buttons, more resistant to be broken and smudge.

6. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.

♦ More Options More Function

The function can be customized according to your requirements, please contact the supplier.

Default configuration

1. Transmitter * 1 piece

2. Receivers * 1 piece

3. Strap * 1 piece

4. Free Joystick * 1 piece

5. The receiver comes with 1m cable connector

6. Operation and Maintenance Manual

Attentions

1. Due to transportation requirements, the product is not equipped with battery.

2. The function can be customized according to your requirements, please contact the supplier.

Warranty & Service

1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.

FAQ

1.Q: Is there a warranty?
A: All our branded products have a 12-month warranty period. We provide 24-hour after-sales service and technical support. If you find any problems during installation, please feel free to contact us.

2. Q: Will you provide after-sales service?
A: Yes. Of course. If there are any problems during operation or installation, please keep free to contact with us. We provide professional guidance and help.
 

3. Q: What is your minimum order?
A: We can accept sample orders for trial orders.
 

4. Q: What certificates are approved for your product?
A: We have CE, FCC, ISO9001.
 

5. Q: Is your price the lowest?
A: We provide high quality industrial remote controls. The quality of our supply is value for money, inferior products will waste and affect the work process. The right price and high quality products are the best choice.
 

6. Q: Can you customize it to my needs?
A: You can send me inquiries according to your needs. We can customize them with technical engineers.