|Application Equipment:||Industrial Equipment||Application:||Welding Mechanical|
|Transmitter Function:||LED Screen||Color:||Silver|
wireless welding machine remote control,
welding machine remote control CE,
CE two way remote control
DHZ-12FBZ3S2M5XSX485 two-way feedback Industrial wireless remote control
With led display for Welding mechanical
The transmitter uses a hand-held housing. The power switch and emergency stop buttons are arranged on the housing. When the power switch is pressed, the screen directly above the panel lights up. All power supplies can be cut off by the emergency stop to ensure safety. Below the screen are two levers, with 12 metal buttons in the middle of the panel, 4 in each row. The three knobs below control speed, voltage and current respectively.
Three alkaline dry batteries are installed in the transmitter battery compartment, which can be used for 1 to 3 months at a time. The red light on the remote control will be on when the battery is about to run out. In this case, it can be used for about eight hours.
|Transmitter Function||LED screen|
1. Stable control signals will ensure no interference during use. The unique signal is encrypted and coded, and there is no interference when using multiple sets of remote controllers in an environment.
2. Stainless steel panel and buttons, more resistant to be broken and smudge.
3. The transmitter is sealed with silicone rubber ring, which is good waterproof.
4. Heartbeat packet detection:Once the transmitter is damaged or the signal is lost, the receiver will stop automatically.
5. The antenna is built inside to prevent it from being broken.
6. Each set remote control has unique ID identification code, even if the same frequency also does not interfere with each other.
1. Transmitter * 1 pcs
2. Receivers * 1 pcs
3. The receiver comes with 1m cable connector
4. Operation and Maintenance Manual
1. Due to transportation requirements, the product is not equipped with battery.
2. The function can be customized according to your requirements, please contact the supplier.
1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
Packing & Delivery
Generally speaking, as long as the electric control of construction machinery equipment, our remote control, can be seen as, we are specialized in making industrial wireless remote control, facing a wide range of equipment.
We have remote control corresponding to the requirements of crane machinery and equipment in various situations, such as single hook and single speed crane, which has fast and slow speed up and down for single hook, no fast and slow speed in East, West, North and south, and fast and slow speed in each direction for single hook up, down, East, West, North and south.
Answer: the function of the remote control has nothing to do with the tonnage, nor with the motor power of the crane, only with the number of actions.
Yes, the frequency conversion crane is a stepless speed regulation control mode. Like an automatic car, the larger the accelerator is, the faster the speed is. There is no need to engage the gear.
During the operation of the remote control, it has instantaneous and immediate response, the execution time difference is 20-40ms, 1 second is equal to 1000ms, and the signal sensitivity at the receiver end is - 110dbm. Macroscopic judgment with naked eyes, the action of the device end is generated at the moment of key triggering, basically without time difference.
The regular one is 100 meters, but it can be customized for further distance, such as 250 meters, 500 meters, 800 meters, 1000 meters, 1500 meters, 2000 meters, etc. the corresponding distance can be customized according to the actual demand.
Contact Person: Mr. Zhu