|
Product Details:
|
| Controlling Distance: | ≥100m/ Distance Can Be Customized | Transmitter Antenna: | Inside |
|---|---|---|---|
| Button Life: | ≥ 1 Million Times | Panel & Button Material: | Stainless Steel |
| Receiver Power Supply: | DC12V/24V Or AC 36V/220V/380V (AC By External Transformer) | Temperature Range: | -25℃~+75℃ |
| Enclosure Protection Class: | IP65 | Transmitter Power Supply: | Embedded Lithium Battery |
| High Light: | IP65 industrial wireless remote control,DC12V industrial wireless remote control |
||
DH-Z4M8F professional industrial wireless remote controller for bridge erecting machine
-------------------------Specification-----------------------------
| Main function | 4 speed control knobs, each corresponding to 0-10V output; 4 three-position self-resetting toggle switches, each corresponding to 1 mechanism forward and reverse 2-way switching value self-resetting action; 4 three-position self-locking knobs Switch, each corresponding to 1 mechanism forward and reverse 2-way switching value self-holding action; 4 two-position self-locking twist switches, each corresponding to the start and stop of 1 device, 1-way switching volume holding action; 1 ABC three The selection position rotary switch corresponds to 3 switching actions, which can be used to select different states or devices. One 123 three selection position rotary switch, which can select the action of No. 1, No. 2, No. 3 equipment, corresponding to the receiver side 3 normally open point relay output; 1 1/2/1+2 total three selection position band rotary switch , You can choose any one of the two devices or two devices to perform actions together, corresponding to the receiver's 2 normally open relay outputs; 1 ten-position band selector switch, you can choose 10 different states or action forms or device numbers, Corresponding to the receiver side 10 normally open relay output; 8 action execution buttons, all in jog mode, and up and down interlocking, east-west interlocking, north-south interlocking, 1 and 2 interlocking, each button corresponds to the receiver side 1 normally open relay output; start knob + emergency stop knob, start is used to start the transmitter's local power supply and correspond to the connection of the main output control loop of the receiver. At this time, the controlled end device is powered on and the emergency stop is photographed. The main output control loop can be cut off instantaneously, and all other actions being executed can be cut off at the same time. |
| Product Highlights | Good anti-interference performance, each set of remote control transmitter and receiver has a unique identification code, and there are up to hundreds of millions of groups, which will never be repeated, and mutual crosstalk and interference may be strictly avoided. And the remote control frequency points up to 50-256, each set in the same environment can be configured separately, even if the frequency points overlap, in view of the uniqueness of the ID identification code, they will not have any impact on each other, ensuring safety and reliability. |
| Application | Equipment within the switch value of 46 points and 4 channels of analog speed control function, such as bridge erector, beam hoist, port crane, tower crane, crane crane, overhead crane, conventional crane, three hoist crane crane, three car crane crane, gantry crane, Door cranes, etc., as well as chain hoists, special vehicles, tunnel trolleys, hydraulic machinery, roadheader pumping stations, mobile crushers, special vehicles, plate rolling machines, multi-motor equipment, shears, construction machinery, construction vehicles , Mining machinery, etc. |
| Technical parameter | The remote control distance is 100 meters, 250 meters, the working temperature is -35°-+75°, the transmitter is powered by 3 AA dry batteries 4.5V, the receiver's normal working voltage is AC/DC 12-24V, other voltages AC220V or AC380V, etc., pass Transformation adaptation of external transformer. |
| Model and configuration instructions | This machine model DH-Z4M8F includes 1 transmitter and 1 receiver as standard. The transmitter antenna is built-in, and the receiver is equipped with an external extended suction cup antenna (1 meter long feeder), which is adsorbed on the outside of the distribution box, and the receiver is built-in Install. |
Default configuration
1. Transmitter * 1 piece
2. Receivers * 2 piece
3. Strap * 2 piece
4. The receiver comes with 1m cable connector
5. Operation and Maintenance Manual
Attentions
1. When you order, please remark the voltage. Or you can contact to supplier.
2. Generally, the receiver is installed in the distribution box. If not, we will prepare the receiver housing for external installation. If you neet the shell, please let us know when placing the order.
1. Customized logo and trademark are warmly-welcomed.
2. Good after-sale services offered.
3. 1 year warranty period, spare parts supply for free.
4. 100% QC inspection before shipment.
Packing & Delivery
FAQ
1. Q: Is there a warranty?
A: All our branded products have a 12-month warranty period. We provide 24-hour after-sales service and technical support. If you find any problems during installation, please feel free to contact us.
2. Q: Will you provide after-sales service?
A: Yes. Of course. If there are any problems during operation or installation, please keep free to contact with us. We provide professional guidance and help.
3. Q: What is your minimum order?
A: We can accept sample orders for trial orders.
4. Q: What certificates are approved for your product?
A: We have CE, FCC, ISO9001.
5. Q: Is your price the lowest?
A: We provide high quality industrial remote controls. The quality of our supply is value for money, inferior products will waste and affect the work process. The right price and high quality products are the best choice.
6. Q: Can you customize it to my needs?
A: You can send me inquiries according to your needs. We can customize them with technical engineers.
To provide quality products at the same time to improve after-sales support
An independent R & D and design company with ten years of technology accumulation, which can be quickly customized.
We have own assem- bling factory and mold factory.
Professional team to provide you with efficient service.
Contact Person: Mr. Zhu
Tel: +8613914718279
Fax: 86-025-5882-9997
